 |
mSeries Servers
1U
2U
4U
ecoSeries Servers
1U
2U
4U
|
m1425 1025c-3b
MDS mSeries Servers
Achieving new levels of computing performance, MDS's servers offer customers high compatibility and an advanced system architecture ideal for any environment. Redundant components and exceptional cooling design provide customers with maximum system uptime.
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core, with 1333 / 1066 MHz FSB
2. Up to 48GB 667/533MHZ DDR2 ECC
Register SDRAM *
3. 1 (x8) PCI-E Slot
4. Intel® 82573V & 82573L
Gigabit Ethernet Controller
5. 4 x 2.5" Hot-swap SAS Drive Trays
6. 560W 85%+ High-efficiency Power Supply
|
|
| Available Colors: |
Black  |
|
 |
|
|
|
|
|
 |
| SYS-1025C-3B |
- SuperServer 1025C-3B (Black)
|
| |
|
Super X7DCL-3 |
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
- 1333 / 1066 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory *
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- 667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
|
| SAS |
- LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA |
- Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMLC)
- (Optional: AOC-SIMLC)
- NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only
|
| Network Controllers |
- Intel® 82573V & 82573L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- XGI Z9 with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| SAS |
|
| Serial ATA |
- Six Serial ATA ports
- Four SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| |
|
| PCI-Express |
|
| |
|
| Hot-swap |
- 4x 2.5" Hot-swap SAS / SATA drive bays
|
| |
|
| DVD-ROM |
- Slim DVD-ROM drive (optional)
|
| |
|
| 1x SAS / SATA Backplane |
| |
|
|
| Fans |
- 3x 40x56mm Counter Rotating Fans
- 2x 40x28mm fans for add-on card (optional)
|
| |
|
| 560W AC to DC power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 6.5-2.6 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
80 PLUS Silver Certified
[Test Report] |
| |
|
| CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
| |
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X7DCL-3-O-P
CSE-111TQ-560CB |
1
1 |
Super X7DCL-3 Motherboard
1U Chassis (B = Black) |
| Air Shroud |
MCP-310-00029-01 |
1 |
1U Air Shroud |
| Backplane |
BPN-SAS-113TQ |
1 |
SAS / SATA Backplane [ Manual ] |
| Cable(s) |
CBL-0087L
CBL-0157L
CBL-0061L
CBL-0296L |
1
1
4
3 |
16-pin to 16-pin Front Cable
8-Pin to 8-Pin Ribbon Cable For SGPIO
SATA Cable SET
9?4-pin Fan Extension Cord |
| CD |
CDR-X7 |
1 |
Driver CD |
| Drive Tray(s) |
MCP-220-00047-0B |
4 |
Hot-swappable Hard Drive Tray (B = Black) |
| Fan(s) |
FAN-0101L4 |
3 |
40x56mm, 4-pin counter-rotating fans |
| Heatsink / Retention |
SNK-P0017 |
2 |
Please refer to our Thermal Components Matrix |
| Mounting Rails |
MCP-290-00050-0N |
1 |
SC813M 1U Chassis Mounting Rails |
| Power Supply |
PWS-562-1H |
1 |
560W High-Efficiency Power Supply |
| Riser Card |
CSE-RR1U-E8 |
1 |
1U PCI-E x8 Riser Card |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| IPMI |
AOC-SIMLC
AOC-SIM1U+ |
-
- |
IPMI 2.0
IPMI 2.0 w/ KVM Over LAN |
|
|
|
* PCB 1.1A supports up to 48GB of single / dual rank memory
PCB 1.1 supports up to 32GB of single rank memory
**This memory modules are not tested yet |
|
